100mm Polyurethane Castor
400kg Capacity
Swivel Plate Brake

The HUR100/OZPTB is a 100mm polyurethane braked castor, rated to 400kg per castor. Made by Fallshaw in Australia, it pairs a keyed polyurethane on a nylon centre wheel on a maintenance-free roller bearing with a zinc Core Coat fork, so a loaded trolley moves with little push effort. One press of the pedal locks both the wheel and the swivel, so 400kg stays where you left it, even on a slope.

• 100mm x 40mm keyed polyurethane on a nylon centre wheel, non-marking
• 400kg per castor, 1,600kg per set of four
• Total brake locks wheel and swivel, 140mm swept radius
• Roller bearings, 12.7mm bore x 60mm hub replaceable wheel
• 130mm x 100mm plate, four 11mm holes on 105 x 80mm centres
• Overall height 138mm, zinc Core Coat finish, 3 year warranty

Why Polyurethane

Polyurethane carries more weight per castor than rubber and rolls with less effort under load. The tread is mechanically keyed into the nylon centre, so it will not chip off or go brittle, and it stays non-marking on smooth concrete, tiles and vinyl. That makes the 100mm polyurethane castor a good fit for heavier industrial trolleys, hospital and school equipment, and warehouse carts on smooth concrete, tile or vinyl where load and long tread life matter.

Bolts Straight Onto Existing Trolleys

The 130mm x 100mm top plate shares the same footprint as the Rex EHI and MHD industrial castors, so it swaps in without redrilling. The wheel is replaceable too, so a worn tread means a new wheel, not a new castor.

Fixed, Swivel and Braked Versions

The 100mm Polyurethane also comes as a fixed plate (HUR100/HZF) and a swivel plate (HUR100/OZP). All share the same wheel, height and plate, so you can mix them on one trolley. Bulk and trade pricing is available on full sets, and every variant is listed on the O Series castor range page.